yanmar impellor
Moderators: klaus53123, Brad, classicone, moderators
-
- Posts: 5
- Joined: Fri Oct 21, 2016 11:35 am
yanmar impellor
I was wondering if anyone had any tips for replacing the impellor on a yanmar3gm. On the snowgoose 37 it is hard up against the bulkhead and seems very difficult to access.Any ideas gratefully received.
Re: yanmar impellor
Sorry to say that I am not familiar with the Yanmar 3gm. I have a Kubota in which the impeller is aft of the engine in a VERY accessible place, just 6 little bolts. As these impellers should be changed every year I suggest you find an easy way to get to it. I left mine for 3 years and when I got in there, there was a blade missing (fortunately which I found) and the rest was looking very sad. I learn from either making mistakes or from other peoples mistakes, and that one won't happen again. Good Luck.
Davy
Davy
-
- Posts: 5
- Joined: Fri Oct 21, 2016 11:35 am
Re: yanmar impellor
Thank you davy. Unfortunately my impellor pump is very difficult to access but I agree that it needs checking every year.
thanks for your reply
thanks for your reply