yanmar impellor

Discuss all things about Prouts

Moderators: klaus53123, classicone, Brad, moderators

yanmar impellor

Postby trustnoone » Sat Oct 22, 2016 9:33 am

I was wondering if anyone had any tips for replacing the impellor on a yanmar3gm. On the snowgoose 37 it is hard up against the bulkhead and seems very difficult to access.Any ideas gratefully received.
trustnoone
 
Posts: 5
Joined: Fri Oct 21, 2016 11:35 am

Re: yanmar impellor

Postby DavyH » Wed Nov 02, 2016 7:01 am

Sorry to say that I am not familiar with the Yanmar 3gm. I have a Kubota in which the impeller is aft of the engine in a VERY accessible place, just 6 little bolts. As these impellers should be changed every year I suggest you find an easy way to get to it. I left mine for 3 years and when I got in there, there was a blade missing (fortunately which I found) and the rest was looking very sad. I learn from either making mistakes or from other peoples mistakes, and that one won't happen again. Good Luck.
Davy
DavyH
 
Posts: 2
Joined: Thu Jan 01, 2015 11:44 pm

Re: yanmar impellor

Postby trustnoone » Thu Nov 03, 2016 12:03 pm

Thank you davy. Unfortunately my impellor pump is very difficult to access but I agree that it needs checking every year.
thanks for your reply
trustnoone
 
Posts: 5
Joined: Fri Oct 21, 2016 11:35 am


Return to Prout Discussion

Who is online

Users browsing this forum: No registered users and 2 guests

cron