Quest 31 Specifications

Discuss all things about Prouts

Moderators: klaus53123, classicone, Brad, moderators

Quest 31 Specifications

Postby jvolpehoo » Sun May 25, 2014 1:17 pm

Just bought a '78 needing lots of TLC. Does anyone have master carpenter's certificate or builders cert?Manufacturer's specs for rigging or anything else for that matter? I need to find the net tonnage for USCG documentation. This is not displacement weight but the cubic volume of hull and cabin. Also any advice on sailing her greatly appreciated. I read somewhere to always put the staysail up first and take it down last... tips such as these would be very helpful.
Thank you
jvolpehoo
jvolpehoo
 
Posts: 7
Joined: Fri May 23, 2014 4:47 pm

Re: Quest 31 Specifications

Postby classicone » Thu Aug 21, 2014 11:44 pm

Hello,
We also have a 31 that we have sailed up and down the east coast. As far as sails... I rarely use the staysail. When trying to point higher or as a storm sail, but as a normal course of day sailing, it is just not used that much. I will try to answer questions as you ask them.
Terry

PS where are you located?
classicone
Moderator
 
Posts: 80
Joined: Fri Sep 19, 2008 3:09 am
Location: Hertford, North Carolina, USA


Return to Prout Discussion

Who is online

Users browsing this forum: No registered users and 2 guests

cron