Hi all, I have to lift my engine (VOLVO PENTA 2030MD) and am not sure how I go about separating it from the saildrive. Anybody else had to do this on the water? Suggestions welcome. Thanks
Pete
FLYING DRAGON
PUERTO GALERA
PHILIPPINES[/i]
PROUT 39. LIFTING ENGINE FROM SAILDRIVE
Moderators: klaus53123, Brad, classicone, moderators
-
- Posts: 5
- Joined: Thu Nov 27, 2008 4:25 am
- Location: PHILIPPINES
Prout engine out
Try contacting Mike on Peregrine who is in the middle of an engine out job - he has some fancy lifting tackle rigged at present.
Prout Quest 33CS 1986
Re: PROUT 39. LIFTING ENGINE FROM SAILDRIVE
Picture of hoist arrangement for my prout 39 engine lift to change saildrive seals
- Attachments
-
- engine.jpg (83.16 KiB) Viewed 23137 times
Re: PROUT 39. LIFTING ENGINE FROM SAILDRIVE
Picture right side up this time. Used a board cut to fit through small ports either side of engine compartment and attached small chain hoist "come-a-long"
- Attachments
-
- engine3.jpg (95.21 KiB) Viewed 23136 times