PROUT 39. LIFTING ENGINE FROM SAILDRIVE

Discuss all things about Prouts

Moderators: klaus53123, classicone, Brad, moderators

PROUT 39. LIFTING ENGINE FROM SAILDRIVE

Postby PETER STEVENS » Sun Sep 13, 2009 7:29 am

Hi all, I have to lift my engine (VOLVO PENTA 2030MD) and am not sure how I go about separating it from the saildrive. Anybody else had to do this on the water? Suggestions welcome. Thanks

Pete
FLYING DRAGON
PUERTO GALERA
PHILIPPINES[/i]
PETER STEVENS
 
Posts: 5
Joined: Thu Nov 27, 2008 4:25 am
Location: PHILIPPINES

Prout engine out

Postby Quester » Fri Nov 20, 2009 7:55 pm

Try contacting Mike on Peregrine who is in the middle of an engine out job - he has some fancy lifting tackle rigged at present.
Prout Quest 33CS 1986
Quester
 
Posts: 8
Joined: Mon Apr 27, 2009 6:43 pm
Location: Solent, UK

Re: PROUT 39. LIFTING ENGINE FROM SAILDRIVE

Postby tailrotor » Fri Mar 06, 2020 2:35 am

Picture of hoist arrangement for my prout 39 engine lift to change saildrive seals
Attachments
engine.jpg
engine.jpg (83.16 KiB) Viewed 2100 times
tailrotor
 
Posts: 10
Joined: Sat Jul 02, 2016 2:36 pm
Location: USA Virginia, Prout 39

Re: PROUT 39. LIFTING ENGINE FROM SAILDRIVE

Postby tailrotor » Fri Mar 06, 2020 2:43 am

Picture right side up this time. Used a board cut to fit through small ports either side of engine compartment and attached small chain hoist "come-a-long"
Attachments
engine3.jpg
engine3.jpg (95.21 KiB) Viewed 2099 times
tailrotor
 
Posts: 10
Joined: Sat Jul 02, 2016 2:36 pm
Location: USA Virginia, Prout 39


Return to Prout Discussion

Who is online

Users browsing this forum: No registered users and 2 guests

cron