Search found 6 matches
- Thu Oct 08, 2009 1:04 pm
- Forum: Prouts for Sale
- Topic: Snowgoose Elite FOR SALE
- Replies: 0
- Views: 20213
Snowgoose Elite FOR SALE
A Vendre / For Sale Catamaran ZOAR  With lightweight genoa on r/r and spinnaker in bag Prout Snowgoose Elite Catamaran 11.38m x 4.95m x 0.8m 11500lbs. Hull 281 Euro 80,000 o.n.o. Engine Yanmar Inboard Diesel 3GM30F, stainless fuel tank, Sillett Sonic Outdrive Leg. Hydraulic wheel steering. Sails: (...
- Wed Dec 24, 2008 12:41 am
- Forum: Help wanted
- Topic: Coppercoat Antifouling
- Replies: 9
- Views: 52028
coppercoat
removed all the old antfoul with a Harken! scraper and sharp woodplane blade wrapped in cloth to save the hands, needs to be sharp. The sound VC tar below remained but the not so well applied came off, which did not worry me because obviously spending the money on the CB you need to know it's going ...
- Wed Dec 17, 2008 10:05 pm
- Forum: Help wanted
- Topic: Holding Tank on Elite
- Replies: 0
- Views: 7344
Holding Tank on Elite
Experience of fitting a holding tank on the Snowgoose Elite would be much appreciated, it will be a DIY installation this spring, thanks. ZOAR
- Wed Dec 17, 2008 10:01 pm
- Forum: Help wanted
- Topic: Coppercoat Antifouling
- Replies: 9
- Views: 52028
copper coat
Hi, we copperbottomed Zoar, 37' Elite, last July while doing a partial re fit, the thoughts being that if we get into the med, she is in Brittany at present, we would not need to haul out etc for many years. I was pleased with the application other than we suffered trying to get two days without rai...
- Thu Oct 02, 2008 8:36 pm
- Forum: Help wanted
- Topic: CampingGaz Refridgerator
- Replies: 0
- Views: 7737
CampingGaz Refridgerator
I'm looking for advice regarding the fridge fitted to the snowgoose elite, made by Camping Gaz, it works on 12volt and 240v but I cannot get any joy on gas which I need for energy saving, the piezo ignition does not appear to be producing any spark, any experience out there of replacing the piezo eq...
- Thu Oct 02, 2008 8:28 pm
- Forum: Help wanted
- Topic: Leaky Windows
- Replies: 7
- Views: 47616
windows
hi, what was the problem with the first method which I assume meant (a)putting on the foam as a spacer (b)loosely fitting window(c) injecting with a skeleton gun the mastic and smoothing edges (d) after curing a final tighten up, I will be doing the side windows on my snowgoose in spring, the front ...